Tank cap gasket Lea, lucia, Geysvap

Marketed from 1994 to 1998

Marketed from 1994 to 1998

Marketed from 1995 to 1998

Compatible only with LEA ironing board and Geysvap steamer

Caution! This cap does not fit the NEPTUNE/NEPTUVAP/ECO PRO steam iron (different diameter)

Triangular shape with clips

Compatible with geysvap, neptune, ecoprof

Geysvap, neptune, Ecoprof compatible

Compatible with geysvap, neptune, ecoprof

Geysvap, neptune, ecoprof compatible

Compatible with geysvap, neptune, ecoprof

Compatible with: Geysvap, Neptune, Ecoprof

Compatible with Geysvap, Neptune, Eco prof

compatible: Neptune, Gesvap, Ecoprof

Sold individually

For Neptune Steam Iron, Ecoprof, Geysvap

Compatible with geysvap, neptune, ecoprof

Compatible with oko3000, oko8000, ecoprof, neptune, max2, geysvap.

Geysvap, neptune, ecoprof compatible

Geysvap, neptune, ecoprof compatible

Compatible with geysvap, neptune ecoprof in 12 volts

Composed of :

- 5 microfibers :

green (kitchen)

red (bathroom)

blue (windows)

off-white (dust)

white (for textiles)

- 1 sponge

- 1 spray (windows/mirrors)

- 1 hand broom

- 1 telescopic handle 70 - 130 cm

- 1 ultra-flat, lightweight broom

- 1 mop (floor dusting)

- 1 non-fringed microfiber (floor, wall & ceiling cleaning)

Consists of :

- a blue curly microfiber (for washing)

- an off-white woven microfiber (for wiping)

- a glove with blue looped microfiber on one side and woven off-white microfiber on the other.

Red microfiber for bathrooms and sanitaryware (washbasins, showers, bathtubs, WCs, etc.), earthenware, marble or melamine and taps.

Green microfiber for kitchens (sinks, hobs, refrigerators ....), tiled, marble or melamine worktops and taps.

Off-white microfiber for textiles. For cleaning certain stains on carpets, rugs, car seats and sofas (when possible, of course...).

Blue microfiber for cleaning windows, mirrors, shower cubicles, verandas, bay windows, windscreens ...

Small elongated (rectangular) brush with 1 clip.

Compatible with Geysvap, Neptune, Eco prof.

Allows brush to be used on carpets and fabrics.

Iron base for Neptune Ecoprof and Geysvap.

Bracket for Neptune Ecoprof and Geysvap irons.

Holds the single-tube sleeve at the right height for easy ironing.

Switch for 1st generation neptune and geysvap

220-volt main switch for Neptune, Ecopro and Geysvap

12-volt switch for steam and hot water control

One-piece socket for Neptune Geysvap and Ecopro

(for 2nd generation 12 V units.

Can be adapted to 1st generation 220 V units by modifying the hose plug. To do this, remove 2 to 3 mm from the end of the hose's male plug.)

Safety shutter for Neptune and Geysvap.

right-hand spring to close the shutter of the monobloc socket for Neptune and Geysvap

Left-hand spring for one-piece socket flap for Neptune and Geysvap

Steam connection for steam hose plug or iron plug for Neptune or Geysvap models

Flexible nozzle on gun side supplied without gasket: to be ordered additionally on site

4-meter hose for Neptune and Ecoprof 2nd generation.

After 2006.

Power cable for Neptune, Ecoprof and Geysvap.

Single-tube sheath for Neptune and Ecoprof iron.

After 2000.

For latest-generation irons with 5-conductor sheath.

Clearance end of series (item may show scratches, light dents or traces of dust)

Red lower housing for Geysvap.

Supplied bare.

Clearance end of series (item may show scratches, light dents or traces of dust)

White top cover for Geysvap.

Supplied bare.

Clearance end of series (item may show scratches, slight dents or traces of dust)

Handle for Neptune, Ecoprof and Geysvap.

Supplied bare.

5th stud for flexible socket or iron socket for Neptune, Ecoprof and Geysvap in 12 volts.

Lower tank connection for Neptune, Ecoprof and Geysvap.

Hose control switch for Geysvap.

Clearance end of series (item may show scratches, light dents or traces of dust)

Ringer for Neptune, Ecoprof and Geysvap.

Connection for Neptune, Ecoprof and Geysvap monobloc plugs.

Not suitable for flexible and iron sockets.

Tank drain plug for Neptune, Ecoprof and Geysvap.

Supplied bare, without drain plug gasket.

Wheel for Neptune, Ecoprof and Geysvap.

Sold individually.

Hose sheath locking ring for Neptune, Ecoprof and Geysvap.

Storage cart wheels compatible with Geysvap, neptune, ecoprof.

Delivery: 2 wheels + 2 clip's + 2 clip's covers

Clearance end of series (item may show scratches, slight dents or traces of dust)

Handle for Neptune, Ecoprof and Geysvap hoses.

Supplied bare.

Handle does not have red steam trigger.

For pre-2006 hoses.

Microswitch for 2 to 6 bar pressure switch for Neptune, Neptuvap, Eco Prof steam appliances.

Complete pressing iron for Lea.

Iron weight: 1.5 kg

Set of 2 gaskets

Iron with 4-conductor sheath for use with Lea and Lucia ironing boards.

Compatible with: Léa, Lucia, KR1, KR3, KR4.

Caution: Identify connections before reassembling iron, do not rely on conductor colors.

Stand for Lea ironing board.

Compatible with: Léa.

Sold individually.

Heating element for Lea ironing board.

Compatible with: Léa.

Sold bare.

Complete solenoid valve for Léa ironing board.

Compatible with: Léa.

Sold with 220-volt coil.

Pressure switch for Léa ironing board.

Compatible : Léa.

Black adaptable socket for Léa ironing board

Compatible with: Léa.

Sold bare, without 4-pin connection.

Warning: Modification to be made: drill at the fixing points to install this socket in the Léa ironing board.

Please note: the 12-volt label does not apply to the Léa ironing board, which has 220-volt connections.

Woven steam sheath for ironing boards Léa, Lucia.

Compatible: Léa, Lucia, KR1, KR3, KR4.

Caution: this sheath can be used between the iron and the control unit and between the control unit's internal components: between the solenoid valve and the iron's socket.

Length : 215 cm , outside diameter: 9.5 mm and inside diameter: 4.0 mm

Stand for Lea ironing board.

Compatible with: Léa.

Iron rest for Lea ironing board.

Compatible with: Lea.

Supplied bare without retaining plugs.

Clearance end of series (item may show scratches or slight dents or traces of dust)

1st generation Léa iron thermostat.

Slide for Lea ironing board.

Compatible with: Léa.

Sold bare.

Male plug for Léa iron.

Compatible: Léa.

Sold with 4-pin connection and steam lug, plus screws.

Steam connection for LEA ironing board plug.

Supplied with 2 seals.

Clearance end of series (item may show scratches, light dents or traces of dust)

Lever for Lea table slide.

Bowl support for Léa ironing board.

Wire-guide bracket for Lea ironing board.

4-conductor sheath for Lea and Lucia ironing boards.

Compatible with: Léa, Lucia, KR1, KR3, KR4.

Caution: Identify connections before reassembling iron, do not rely on conductor colors.

Clearance end of series (item may show scratches, light dents or traces of dust)

Lea tank cover.

Delivered bare.

Clearance end of series (item may show scratches, light dents or traces of dust)

Lea table spring.

Indicators for Léa ironing board.

Green for tank heating and red for lack of water.

Clearance end of series (item may show scratches, light dents or traces of dust)

Push button on 1st generation Lea iron.

Supplied bare.

Clearance end of series (item may show scratches, light dents or traces of dust)

Below the thermostat control knob on the 1st generation Léa iron.

Supplied bare.

Clearance end of series (item may show scratches, light dents or traces of dust)

Thermostat control knob on 1st generation Léa iron.

Supplied bare.

Clearance end of series (item may show scratches or slight dents or traces of dust)

Thermostat knob extension on 1st generation Léa iron.

Clearance end of series (item may show scratches, light dents or traces of dust)

Steam flow adjustment knob for the Léa table.

Supplied bare.